Tone 91-EZ TC Shear Wrench is specifically designed to be used with
Tension Control (TC) Bolts. The Tone 91-EZ TC Shear Wrench has an outer socket that turns the nut counterclockwise, while grabbing the spline of the bolt with the inner socket turning it clockwise. When the proper tension level has been achieved the spline snaps off giving you a visual indication of proper installation. The handle is made of metal and is very durable.
GS-91EZ Capacity
| A325 | 5/8" | 3/4" | 7/8" | 1" |
| A490 | 5/8" | 3/4" | 7/8" | 1" |
GS-91EZ Specifications
| Frequency | Voltage | Max Current | Power Consumption | Max Torque | No-Load Rotation | LBS |
|---|---|---|---|---|---|---|
| 50Hz | 110V | 17.0 A | 1,750 W | 810lbf | 17 rpm | 20.3 |
GS-91EZ Inner & Outer Sockets
| Haydon Part # | Description | Weight |
| WH9062I | S-90EZ 5/8 INNER SOCKET | 1.23 |
| WH9062O | S-90EZ 5/8 OUTER SOCKET | 0.88 |
| WH9075I | S-90EZ 3/4 INNER SOCKET | 1.12 |
| WH9075O | S-90EZ 3/4 OUTER SOCKET | 0.61 |
| WH9087I | S-90EZ 7/8 INNER SOCKET | 1.1 |
| WH9087O | S-90EZ 7/8 OUTER SOCKET | 0.68 |
| WH90100I | S-90EZ 1" INNER SOCKET | 1.61 |
| WH90100O | S-90EZ 1" OUTER SOCKET | 0.68 |
GS-91EZ Parts List
| Part # | Description | Qty | Part # | Description | Qty |
|---|---|---|---|---|---|
| 1-3 | EJECTOR PIN | 1 | 48 | KEY | 1 |
| 1-4 | EJECTOR SPRING | 1 | 49 | MOTOR GEAR | 1 |
| 1-5 | INNER SOCKET SPRING | 1 | 50 | RETAINING RING C-TYPE DIA 12 | 1 |
| 2 | SET SCREW | 2 | 51 | METAL SLEEVE 698 | 1 |
| 3 | SPIROLOX FRS-65 | 1 | 52 | KEY 3X3X8 | 1 |
| 4 | SPIRO STOPPER | 1 | 53 | MOTOR IDLE GEAR | 1 |
| 5 | SPIROLOX FRR-75 | 1 | 54 | RETAINING RING C-TYPE DIA 10 | 1 |
| 6 | OUTER SOCKET HOLDER | 1 | 55A | MOTOR ASS'Y 120V | 1 |
| 7 | BUSH 48×53×10 | 1 | 55B | MOTOR ASS'Y 230V | 1 |
| 8 | INNER SOCKET HOLDER | 1 | 55-1 | METAL SLEEVE BRACKET | 1 |
| 9 | INTERNAL GEAR | 1 | 55-2 | METAL SLEEVE 6000VV | 1 |
| 10 | BUSH 58.5X74.5X2 | 1 | 55-3 | PLATE | 1 |
| 11 | 3RD CAGE | 1 | 55-4 | CRPH SCREW M4X8 W/H WASHER | 2 |
| 12 | STEEL BALL 6mm | 35 | 55-5A | ARMATURE 120V | 1 |
| 13 | BUSH 65X74.5X5 | 1 | 55-5B | ARMATURE 230V | 1 |
| 14 | 3RD IDLE GEAR | 4 | 55-6 | TAP SCREW M5X60 | 2 |
| 15 | NEEDLE CAGE KT121613 | 8 | 55-7A | STATOR 120V | 1 |
| 16 | 3RD GEAR PIN | 4 | 55-7B | STATOR 230V | 1 |
| 17 | 3RD PINION GEAR | 1 | 55-8 | CARBON BRUSH | 2 |
| 18 | BUSH 26X56X2 | 1 | 55-10 | BRUSH CAP | 2 |
| 19 | 2ND CAGE | 1 | 55-12 | METAL SLEEVE 608ZZ | 1 |
| 20 | 2ND IDLE GEAR | 3 | 55-13 | STATOR SPIDER | 1 |
| 21 | NEEDLE CAGE KT121713 | 3 | 55-14 | HSH BOLT M5X25 W/H SPRING WASHER | 4 |
| 22 | 2ND GEAR PIN | 3 | 56 | CUSHION RUBBER | 1 |
| 23 | 2ND PINION GEAR | 1 | 57 | HSH BOLT M5X25 W/H SPRING WASHER | 8 |
| 24 | BUSH 20X52X2 | 1 | 58 | GRIP | 1 |
| 25 | 1ST CAGE | 1 | 59 | PIN H7B 5X18 | 2 |
| 26 | 1ST IDLE GEAR | 3 | 60 | EJECTOR LEVER | 1 |
| 27 | METAL SLEEVE 699 | 3 | 61 | SWITCH LEVER | 1 |
| 28 | 1ST GEAR PIN | 3 | 62 | TRIGGER SWITCH SP115C-2-Z | 1 |
| 29 | FRICTION DISK | 1 | 63 | CRPH SCREW M3.5X6 | 2 |
| 30 | SPIROLOX FRR-70 | 1 | TEETH WASHER | 2 | |
| 31 | SPIRO WASHER | 1 | 64 | LEAD WIRE BROWN | 1 |
| 32 | METAL SLEEVE NTB2035 | 1 | 66 | INSULATED TERMINAL TMEV2-3.5 | 2 |
| 33 | THRUST WASHER AS2035 | 1 | 67A | CORD ASS'Y 120V | 1 |
| 34 | FLANGE | 1 | 67B | CORD ASS'Y 230V | 1 |
| 35 | HSH BOLT M4X10 | 6 | 70 | CORD ARMOUR | 1 |
| 36 | METAL SLEEVE 6003 | 1 | 71 | BUSH 20X24X2 | 1 |
| 37 | 1ST PINION GEAR | 1 | 72 | CORD CLAMP | 1 |
| 38 | METAL SLEEVE 6901 | 1 | 73 | CRPH TAP TIGHT 4X18 | 6 |
| 39 | HOUSING | 1 | 74 | CONDENSER PAB 224 | 1 |
| 40 | HSH BOLT M5X40 | 4 | 75 | EUROPEAN TERMINAL | 1 |
| 41 | EJECTOR BRACKET | 1 | 76 | GRIP COVER | 1 |
| 42 | LATCH | 1 | 78 | SERIAL NUMBER PLATE | 1 |
| 43 | LATCH SPRING | 1 | 79a-1 | RATING PLATE 120V - FRONT | 1 |
| 44 | LATCH GUIDE | 1 | 79a-2 | RATING PLATE 230V - FRONT | 1 |
| 45 | CRPH SCREW M4X20 | 2 | 79b | RATING PLATE - BACK | 1 |
| 46 | PINION BEVEL GEAR | 1 | 81 | METAL CASE | 1 |
| 47 | METAL SLEEVE 6001 | 1 | 82 | SCREW DRIVER | 1 |
